Highland by XS Scuba Mini Tech Pressure Gauge is a great gauge for technical diving, deep diving and overhead environment diving activities. Gauge is small and compact measuring only 1.1" (2.8cm) in diameter, 0.88" (2.2cm) thick and can be mounted directly into a high pressure (HP) port of a first stage regulator or with the adapter and included air spool on the end of a high-pressure hose. Gauge is especially advantageous when used with stage bottles, decompression and safety stop bottles where a full-size pressure gauge is not necessary.
Mini Tech Pressure Gauge has a bright white face that is easy to read at night and in low light diving conditions. The gauge comes with a Viton O-ring and can be threaded directly into a first stage HP port or with the included adapter and Viton O-ringed air-spool, can be alternately attached to the end of a HP Hose. Gauge has a wide 210 Degree sweep and measures pressure from 0 to 5,000 psi.
Mini Tech Pressure Gauge has a bright white face that is easy to read at night and in low light diving conditions. The gauge comes with a Viton O-ring and can be threaded directly into a first stage HP port or with the included adapter and Viton O-ringed air-spool, can be alternately attached to the end of a HP Hose. Gauge has a wide 210 Degree sweep and measures pressure from 0 to 5,000 psi.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
