The HYCON submersible pump is a VORTEX pump. VORTEX pumps are designed especially for dirty water with even very large solids. The impeller at top sets the water in a circular movement and by centrifugal force a center of air shaped like a cone will occur. This way there is very little contact between the water and the impeller, and wear is greatly reduced compared to other types of pumps. In other types of pumps, the water is pumped directly by the impeller, which is therefore worn much faster. Pumps of the special VORTEX design have a longer lifetime and can pump larger solids. The Hycon pumps can also run dry without damaging the pump.
This unit comes with a 30' discharge hose w/ coupler to pump end only.
| SKU | 110136 |
|---|---|
| MANUFACTURE | HyconTM |
| SELECT MODEL | 4" HWP Trash Pump |
| SELECT MODEL | Hycon HWP4 Pump |
| OIL FLOW REQUIRED | 8-10 GPM 30/40 LPM |
| WORKING PRESSURE | 1,750 - 2,175 PSI |
| MAX RETURN PRESSURE | 580 PSI / 40 BAR |
| MAX. LIFT HEAD | 65 Feet / 20 Meters |
| MAX. PRESSURE | 2,500 PSI / 172 BAR |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
