Smooth Drum Walk Behind Roller by Multiquip-Mikasa, Double drum, Honda GX390, 25.6" Drum
Model MRH800GS
Multiquip's durable tandem rollers for walk-behind operation incorporate sophisticated engineering and design to meet the high demands of contractors.
- Runtime and engine rpm measured by hour/tachometer
- Hydrostatic drive eliminates the need for drive belts and adjustments
- Infinite variable speed control provides full operator control over forward and reverse speeds
- External mounted vibrator assembly for easy maintenance access
- Deadman safety control stops the roller when the operator removes hands from the control levers
- Large rubber shock mounts minimize transfer of drum vibration to engine and hydraulic components
- Guide handle folds up 90 degrees for convenient transport and storage
- Narrow profile design for less than 1 inch (25 mm) side clearance
- Dual sprinkler controls wet each drum individually
- Single access maintenance cover for easy access to all hydraulic components
- Maintenance-free permanently lubricated bearings
- Built-in tie-downs on all four corners secure the roller during transport
- *Battery is sold separately
| Compaction Force | 5300 lb | 23.57 kN |
| Frequency | 3300 VPM | 55.3 Hz |
| Travel Speed | 0-2 mph | 0-3 kph |
| Water Tank Capacity | 10.6 gal | 40.12 L |
| Front Drum Width | 25.6 in | 650 mm |
| Rear Drum Width | 25.6 in | 650 mm |
| Overall Length | 105 in | 2667 mm |
| Overall Width | 27.2 in | 691 mm |
| Overall Height | 41.7 in | 1059 mm |
| Operating Weight | 1530 lb | 694 kg |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
