The RIFFE 3 ATM Float is designed to provide 95 lbs of bouyancy at a depth of 66 ft, or 20 meters. The float is pressurized the float up to 30 PSI to allow for increased atmospheric pressure. The float is made to be extremely durable and handle the toughest fish you could want to target, all over the world.

The outside material of the Riffe 3 ATM Float is constructed of 22-oz. heavy-duty, vinyl-coated nylon with a 320 lbs/sq. tear strength. The float will fold up to (14 x 14 x 2 = 4lbs) for easy transport. The side zipper allows access to the inner replaceable urethane bladder or for adding lead-shot ballast for use with a dive flag. The bladder has a reinforced 1,000-lb Denier Cordova sleeve to maintain equal pressure throughout the bladder. The bladder is easily replaced in the event of a puncture, which is rare due to the durability of the float. Two side handles and one rear handle. Comes standard with air pressure gauge and schrader valve adapter air compressor (check local gas station), a scuba tank, or simply by using a bicycle pump. BE SURE TO USE ANAIR GAUGE WHEN FILLING. IF EXCESS PRESSURE IS USED, IT COULD DAMAGE THE FLOAT.

IMPORTANT NOTICE: Be sure that the straps and zipper are properly locked and secure before inflating to avoid damage.

• Designed to maintain lift up to a maximum of 95 lbs at a depth of 66 ft.

• Comes standard with air pressure gauge & schrader valve adapter

• Pressurize the float up to 30 lbs PSI

• Two side handles and one rear handle

• Comes with emergency flare holder

• Essential gear for hunting tuna or other large pelagic species

To learn more about the Riffe 3 ATM Float read this product review. and to learn how to rig this float in your bluewater setup check out this blog post.