- Powerful vibratory plate that also easily compacts heavy soils.
- Compatec: Easy to understand display for compaction control with 8 LEDs
- Intuitive control handle: Control of the direction of movement as well as the speed in the same movement sequence - without changing grip, both hands stay on the control handle
- Low hand-arm-vibrations (well below 2.5 m/s2)
- Height adjustable center pole
- Electric starter with a loud signal tone generator to avoid unnecessary battery discharge
- Safety setting: Machine moves away from the operator if the control handle is released
- Large-sized engine with high power reserves for a long service life
- Motor protection: Not possible to start with a low oil level
- Operating hour meter
- Thick, wear resistant base plate made from nodular cast iron
- The engine and tank are protected by a sturdy frame, which is also useful for a sturdy tie-down during transport.
- Very sturdy, free from play center pole lock, easy to actuate for a secure transport
- Large lifting eye that can be offset to neutral height
- All maintenance accesses are quick and easy to reach
- Self-adjusting V-belt and maintenance-free alternator
- Comprehensive protection of the functional parts against stone chipping and dirt accumulation
- Due to the low frequency, also suitable for the vibration of heavy interlocking paving stones
- Quick and easy assembly of a paving pad possible
| DPU5545H | DPU5545He | DPU5545Heap | DPU5545Hec | |
|---|---|---|---|---|
Operating data | ||||
| Operating weight kg | 399 | 424 | 447 | 426 |
| Centrifugal force kN | 55 | 55 | 55 | 55 |
| Base plate size (W x L) mm | 440 x 900 | 440 x 900 | 440 x 900 | 440 x 900 |
| Base plate thickness mm | 12 | 12 | 12 | 12 |
| Height (without center pole) mm | 790 | 790 | 790 | 790 |
| Operating width (with extension plate) mm | 600 | 600 | 750 | 600 |
| Frequency Hz | 69 | 69 | 69 | 69 |
| Hand-arm vibrations m/s2 | < 2.5 | < 2.5 | < 2.5 | < 2.5 |
| Advance travel max. (dependent on soil and environmental influences) m/min | 27 | 27 | 27 | 27 |
| Surface capacity max. (dependent on soil and environmental influences) m2/h | 980 | 980 | 980 | 980 |
| Gradeability % | 57.7 | 57.7 | 57.7 | 57.7 |
| Transport height mm | 1,514 | 1,514 | 1,514 | 1,514 |
| Transport length mm | 1,048 | 1,048 | 1,048 | 1,048 |
| Transport width mm | 780 | 780 | 810 | 780 |
Engine / Motor | ||||
| Engine / Motor type | Air-cooled single cylinder four-cycle diesel engine | Air-cooled single cylinder four-cycle diesel engine | Air-cooled single cylinder four-cycle diesel engine | Air-cooled single cylinder four-cycle diesel engine |
| Engine / Motor manufacturer | Hatz | Hatz | Hatz | Hatz |
| Engine / Motor | 1D42S | 1D42S | 1D42S | 1D42S |
| Displacement cm3 | 445 | 445 | 445 | 445 |
| Engine performance max. (DIN ISO 3046 IFN) kW | 7 | 7 | 7 | 7 |
| at rpm rpm | 3,600 | 3,600 | 3,600 | 3,600 |
| Operating performance (DIN ISO 3046 IFN) kW | 4.9 | 4.9 | 4.9 | 4.9 |
| at rpm rpm | 3,000 | 3,000 | 3,000 | 3,000 |
| Fuel consumption l/h | 1.6 | 1.6 | 1.6 | 1.6 |
| Fuel tank capacity l | 5 | 5 | 5 | 5 |
| Power transmission | From the drive motor via centrifugal clutch and V-belt directly to the exciter. | From the drive motor via centrifugal clutch and V-belt directly to the exciter. | From the drive motor via centrifugal clutch and V-belt directly to the exciter. | From the drive motor via centrifugal clutch and V-belt directly to the exciter. |
| Fuel type | Diesel | Diesel | Diesel | Diesel |
| CO2 (NRSC) * g/kWh | 993 | 993 | 993 | 993 |
*Determined value of the CO2 emission during engine certification without consideration of the application on the machine.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
