DPU90r Lem770 Reversible Vibratory Plate
5100028358Categories
Compaction , Vibratory Plates ,Reversible Vibratory Plates ,Product Detalis
Heavy remote-controlled vibratory plate with outstanding properties in terms of maneuverability, operating
comfort, sturdiness and transport. Ideal for working in trench applications and sheeting and bracings.
Vibratory plate with unique steering behavior: Very easy to steer due to the remote control with two joysticks. Travel
speed and rotation possible simultaneously, allowing for accurate turning of curves and a fast working speed
Large infrared receiver eye, well-protected from damage: Gives when impacted or folds in
Time-tested and proven safety features of infrared receiver eye technology: Proximity (nearness) recognition sensor
protects the operator, machine standstill if the clear line of sight is interrupted
Remote control in the unit can be charged under lockable hood
Low overall height for compact working and transport dimensions
Sturdy, two-piece steel frame hood, lockable
Fold-down lifting eye, optimally shaped for using various tackle
Start at the push of a button, automatic start after the warm-up phase prevents a cold start that stresses the
machine
Operator's panel, 12 languages available: Electronic operating displays, diagnostic menu, including for battery
voltage, engine speed, coolant temperature, error memory
Machine protection sensor protects the machine from overload when driving on hard sub-surface. Programmable
behavior: Warning flashing, RPM reduction or shutdown of the machine
Programmable anti-theft PIN
Hood can be opened without tools by swinging open, offers quick and spacious access to all control and maintenance parts
Large air filter for long service life
Large tank, fill level can be seen from outside
Quiet liquid-cooled engine
Four large tie-downs on the base plate, very easily accessible, even from outside of the loading area
Optionally also available with Compatec (compaction control).
Four large tie-downs on the base plate, very easily accessible, even from outside of the loading area
Optionally also available with Compatec (compaction control).
ELECTRICAL SYSTEM-1
Remote Control Bat. Capacity : 8 h
Recommended Battery Typ : Ni-MH 7,2V/2000mAh
Remote Control Range : 20 m
Charging Time : 2,00 h
ELECTRICAL SYSTEM-2
Remote Control Bat. Capacity : 8 h
Recommended Battery Typ : Ni-MH 7,2V/2000mAh
Remote Control Range : 65,6 Foot
Charging Time : 2,00 h
ENVIRONMENT DATA-1
Storage temperature range : -20 - 50 C
Sound level LpA : 83,0 dB(A)
Sound level LpA (Standard) : EN 500-4
Operating temperature range : -10 - 50 C
Sound power LWA, measured : 108,0 dB(A)
Sound power LWA, guaranteed : 109,0 dB(A)
Sound power LWA (Standard) : EN 500-4, 2000/14/EG
ENVIRONMENT DATA-2
Storage temperature range : -4 - 122 F
Sound level LpA : 83,0 dB(A)
Sound level LpA (Standard) : EN 500-4
Operating temperature range : 14 - 122 F
Sound power LWA, measured : 108,0 dB(A)
Sound power LWA, guaranteed : 109,0 dB(A)
Sound power LWA (Standard) : EN 500-4, 2000/14/EG
MECHANICAL - OUTPUT DETAILS-1
Vibrations : 3.780 1/min
Vibrations (Hz) : 63 Hz
Centrifugal force : 90,000 kN
Area capacity : 1.294 m2/h
Forward Running : 28,00 m/min
Gradeability : 34,0 %
Transmission : ELHY
MECHANICAL - OUTPUT DETAILS-2
Vibrations : 3.780 1/min
Vibrations (Hz) : 63 Hz
Centrifugal force : 20.233 lbf
Area capacity : 13.928,6 ft2/h
Forward Running : 1,5 fps
Gradeability : 34,0 %
Transmission : ELHY
Engine-1
Cooling : water-cooling
Engine type : Diesel engine
Engine operating mode : four-stroke
Fuel : 2,70 L/hr
Cylinder : 2
Cylinder capacity : 686 cm3
Tank capacity : 7,20 l
Oil filling max. : 1,60 l
Power rating max. : 11,7 KW
Engine speed (Power max.) : 3.600 1/min
Standard (Operating power) : ISO 3046 IFN
Operating Engine speed : 3.350 1/min
Engine Manufacturer : Kohler
Nominal Engine speed : 3.350 1/min
Effective power : 10,7 KW
Oil specification : SAE 10W-40
Standard (Effective power) : ISO 3046 IFN
Standard (Power max.) : ISO 3046 IFN
Operating power : 9,8 KW
Oil filling min. : 1,60 l
Upper idling speed ex load : 3.450 1/min
Exhaust-gas limit : US:EPA4 final+Diretive97/68/EG
Starter battery Voltage : 12 V
Starter type : E-starter
Oil volume incl. filter change : 1,60 l
Air cleaner : dry air filter
Battery capacity (nom. value) : 50 Ah
Inclined position max. : 25,0
Engine-2
Engine type : Diesel engine
Fuel consumption : 0,7 GPH US
Engine operating mode : four-stroke
Fuel : Diesel EN 590
Cylinder : 2
Cylinder capacity : 41,9 Inch3
Tank capacity : 1,9 gal US
Oil filling max. : 0,4 gal US
Power rating max. : 15,7 hp
Engine speed (Power max.) : 3.600 1/min
Standard (Operating power) : ISO 3046 IFN
Operating Engine speed : 3.350 1/min
Engine Manufacturer : Kohler
Nominal Engine speed : 3.350 1/min
Effective power : 14,3 hp
Cooling : water-cooling
Inclined position max. : 25,0
Oil specification : SAE 10W-40
Standard (Effective power) : ISO 3046 IFN
Upper idling speed ex load : 3.450 1/min
Starter battery Voltage : 12 V
Starter type : E-starter
Exhaust-gas limit : US:EPA4 final+Diretive97/68/EG
Oil volume incl. filter change : 0,4 gal US
Air cleaner : dry air filter
Battery capacity (nom. value) : 50 Ah
Standard (Power max.) : ISO 3046 IFN
Operating power : 13,1 hp
Oil filling min. : 0,4 gal US
MECHANICAL DETAILS-1
Width : 770 mm
Height : 833 mm
Operating weight : 724,0 kg
Length Drawbar in op. pos. : 1.207 mm
Ground clearance : 830 mm
MECHANICAL DETAILS-2
Width : 30,3 "
Height : 32,8 "
Operating weight : 1.596,1 lb
Length Drawbar in op. pos. : 47,5 "
Ground clearance : 32,7 "
OPERATING FLUIDS-1
Tank capacity : 7,20 l
Exciter oil volume : 1,60 l
Hydraulic fluid type : Renolin MR 520
Exciter oil type : 75W-90 API GL-4
Cooling fluid volume : 3,30 l
Cooling fluid type : SAE J1034:Wasser (1:1)
Hydraulic fluid volume : 17,7 l
OPERATING FLUIDS-2
Tank capacity : 1,9 gal US
Cooling fluid type : SAE J1034:Wasser (1:1)
Hydraulic fluid type : Renolin MR 520
Exciter oil volume : 1,69 qt US
Exciter oil type : 75W-90 API GL-4
Cooling fluid volume : 3,5 qt US
Hydraulic fluid volume : 18,7 qt US
HYDRAULIC-1
Operating pressure hydraulics : 148,0 bar
max. perm. hydraulic pressure : 230,0 bar
HYDRAULIC-2
Operating pressure hydraulics : 2.146,0 psi
max. perm. hydraulic pressure : 3.335,0 ps
Comes With
Vibratory plateRemote controlOperator's manualMachine configuration instructions
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer
Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
