This compact rebar bender is ideal for both high-production workshops or job sites.
- Bends rebar up to 1-inch (25 mm), up to 180 degrees diameter in seconds
- Angle adjustment knob allows fine tuning of bending angle
- Standard foot switch provides the operator the ability to free up hands for safe material handling
- Driven by a 115-Volt, single-phase electric motor @ 13 amps
- A complete set of rollers and collars is included to quickly change your bending radius
- Two built-in lifting handles are provided for easy movement around the job site
| Max. Rebar Diameter | 1 in | 25.4 mm |
| Bending Range | 0 to 180 | |
| Max. Bending Speed | 180? - Approx. 5 sec | |
| Electric Motor | 115V, 60 Hz, 1?, AC |
| No. 3 Rebar | Diameter | 3/8 in | 9.5 mm |
| Radius | 2.25 in | 57 mm | |
| No. 4 Rebar | Diameter | 1/2 in | 12.7 mm |
| Radius | 3 in | 76 mm | |
| No. 5 Rebar | Diameter | 5/8 in | 15.9 mm |
| Radius | 3.75 in | 95 mm | |
| No. 6 Rebar | Diameter | 3/4 in | 19 mm |
| Radius | 4.5 in | 114 mm | |
| No. 7 Rebar | Diameter | 7/8 in | 22.2 mm |
| Radius | 5.25 in | 133 mm | |
| No. 8 Rebar | Diameter | 1 in | 25.4 mm |
| Radius | 6 in | 152.4 mm |
| Standard Accessories | Foot Switch Rollers (5 sizes) Collars (6 sizes) Tool Kit Waterproof Cover |
| Overall Length | 21 in | 530 mm |
| Overall Width | 19.5 in | 500 mm |
| Overall Height | 17 in | 430 mm |
| Operating Weight | 227 lb | 103 kg |
| Shipping Weight | 331 lb | 150 kg |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
