This is the DiveRite TransPac XT/Voyager XT Wing Dive Package with 16lb Weight Pockets
"
Features:
TransPac XT
- Soft backplate constructed of 1000 denier ballistic nylon for maximum tear and abrasion resistance
- Marine grade stainless sideplates provide custom fit and performance depending on placement at waist
- Shoulder straps feature pivot rings at chest level for load distribution and acetyl resin quick release buckles for easy doff and don. Four 2-inch D-rings on each shoulder strap on sizes L-XXL. Sizes XS-M have one 2-inch D-ring per shoulder strap due to space limitations.
- Two-inch (50 mm) nylon webbing rated at 7,000 pounds breaking strength forms the shoulder and waist straps.
- Dual, 36-inch cam straps with lightweight marine stainless buckles
- Grommet mounting holes slide over bolt kit when diving doubles. Stability plates should also be used when diving doubles to protect harness and provide maximum security.
- Weight XS:4 lbs 4 oz (1.92kg), Sm:4 lbs 4 oz (1.95kg), Med:4 lbs 8 oz (2.054kg), Lg:4 lbs 12 oz (2.15kg), XL:4 lbs 14 oz (2.20kg), XXL:4.93lb (2.23kg),
- Made in the U.S.A.
Voyager XT Wing
- Model BC5200 Voyager XT: SuperFabric brand technology outer shell and 1680 ballistic nylon diver's side panel (extremely resistant to pinches and punctures)
- Inner bladder: 210-denier nylon laminated (highly resistant to pinches and punctures)
- Wing Gusset Control system for streamlining
- Lift: 35 lbs. (15.8 kg)
- LP inflator hose
- 16-inch rapid exhaust (pull-dump) or 12- or 16-inch elbow
- Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim
- Urethane flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
- Weight: 2.8 lbs. (1.27 kg)
- Size: 22-in. H x 19-in. W (55.8cm x 48.3cm)
- Made in the USA
16 lb Weight Pockets
- Holds up to 8 lbs (3.6 kg) in each pocket. Right hand pocket has the Dive Rite logo patch. The left hand pocket is plain, without a logo.
- 1680 denier ballistic nylon fabric is tear and abrasion resistant.
- Two-inch (50.8 mm) nylon webbing loops on the back of the pocket slide over a 2-inch webbing waist strap and secure the pocket into place.
- Acetyl quick buckle is used to easily secure the pocket in the holster.
- Nickel plated brass grommets resist rust and corrosion.
- 9-in high x 3.5-in wide x 1.5-in deep (22.9 cm x 8.9 cm x 3.8 cm)
- 12 oz (340.2 g)
- Made in the U.S.A.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
