DuraVent DuraTech 14" Diameter Chimney Wall Thimble - 14DT-WT Review
You want a long-lasting, energy-efficient venting system for your fireplace at home. DuraVent DuraTech 14" Diameter Chimney Wall Thimble - 14DT-WT is available from Flame Authority, your trusted dealer.

If you need a through the wall installation for your venting, you almost definitely need the DuraVent DuraTech 14 Inch Diameter Wall Thimble! It will provide the correct clearances for your DuraTech venting. Fitting perfectly between standard wall studs, this thimble is installed horizontally through the wall and extends 6 inches into the room. So don't use anything less than the best with the DuraVent!
*Venting Requirements: This unit requires venting pipe with an inner diameter of 14 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
Features:
- Size: 14 Inches
- Interior trim ring painted black
- Fits between standard wall studs
- Use to provide clearance to combustibles
- Must be installed with DuraTech chimney pipe
- Adjusts from minimum of 4" to maximum of 10" wall thickness
- Install horizontally through wall and extend 6" into room beyond wall
Manuals:
- Product Brochure for All Products of DuraVent
- Product Manual for DuraVent DuraTech 14" Diameter Chimney Wall Thimble - 14DT-WT
Need assistance? Talk to an Expert at +1-800-923-4556 or email: support@flameauthority.com to get the best-suited Chimney System for your needs.
Check out this DuraVent DuraTech 14" Diameter Chimney Wall Thimble - 14DT-WT today! Available here at Flame Authority, your trusted dealer!
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.