This is the Spare Air Heed3 Helicopter Emergency Egress Hoseless Tank
175 Series Features:
- More than 1lb lighter than competing models
- Under 9.5" tall, the HEED 3 is the smallest emergency breathing device on the market
- Affordable - the HEED 3 is over $100 less than competitors models
- Simple design is easy to repair and maintain
- Always-on design is ready to deliver air when you need it
- Refillable from an air compressor (or SCUBA tank using an optional adapter)
- Deluxe Dial Gauge Pressure Indicator standard on every unit
- CE approved - Tanks on units shipped to Europe are CE approved to meet current European Safety Standards required for all compressed gas cylinders and are properly CE marked
- Made in the USA
- Can be equipped with an optional Nose Clip on a Lanyard
175 Series Specifications
- Part Number: 175-001 with Holster, 175-002 without Holster
- Cylinder Capacity: 2 cu ft / 58 liters
- Service Pressure: 3000 psi / 207 bar
- Length: 9.5" / 24 cm
- Diameter: 2.25" / 5.7 cm
- Weight: 1.5 lb. / .7 kg
- Cylinder Material: Aluminum - Black Anodized
- Regulator Type: Single Stage
- Pressure Relief: Integrated in regulator
- Operational Temperature: -22?F / -30?C < +158?F / +70?C
- Duration of Air: 38 breaths*
- *Based on 1.5 liters per breath
300 Series Features:
- Affordable - the HEED 3 is over $100 less than competitors models
- Simple design is easy to repair and maintain
- Always-on design is ready to deliver air when you need it
- Refillable from an air compressor (or SCUBA tank using optional adapter)
- Deluxe Dial Gauge Pressure Indicator standard on every unit
- CE approved - Tanks on units shipped to Europe are CE approved to meet current European Safety Standards required for all compressed gas cylinders and are properly CE marked.
- Made in the USA
- Can be equipped with optional Nose Clip on a Lanyard
300 Series Specifications
- Part Number: 300-001 (with Holster), 300-002 (without Holster)
- Cylinder Capacity: 3 cu ft / 85 liters
- Service Pressure: 3000 psi / 207 bar
- Length: 13.4" / 34 cm
- Diameter: 2.25" / 5.7 cm
- Weight: 2.2 lb. / 1kg
- Cylinder Material: Aluminum - Black Anodized
- Regulator Type: Single Stage
- Pressure Relief: Integrated in regulator
- Operational Temperature: -22?F / -30?C < +158?F / +70?C
- Duration of Air: 57 breaths*
- *Based on 1.5 liters per breath
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
